aluminum electrolytic capacitors pressure relief vent l + 2 max. d + max. 15 min 4 min sleeve (polyolefin) sleeve (p.e.t) or d p 0.5 d p 8 0.8 3.5 10 0.8 5.0 12.5 1.0 5.0 16 1.0 7.5 d 0.6 0.6 0.6 0.8 18 1.0 7.5 0.8 u 1 b 2 t 3 1 4 a 5 2 6 2 7 1 8 m 9 p 10 d 11 8 12 configuration capacitance tolerance ( 20%) rated capacitance (220 f) rated voltage (10v) series name type in case l > 25 for the 12.5 dia. unit, lead dia. d = 0.8mm. d 8 10 pb-free leadwire pb-free pet sleeve pd8 12.5 to 18 hd8 standard type pb-free leadwire pb-free polyolefin sleeve pd hd semi-standard type configuration (mm) p.e.t. sleeve product is also available upon request. bt series high temperature range, for +125 c use highly dependable reliability withstanding load life of 2000 to 10000 hours at +125 c. suited for automobile electronics where heavy duty services are indispensable. compliant to the rohs directive (2002/95/ec). radial lead type specifications category temperature range rated voltage range rated capacitance range capacitance tolerance leakage current tangent of loss angle (tan ) stability at low temperature endurance shelf life marking performance characteristics item 40 to +125 c (10 to 250v), 25 to +125 c (350 to 450v) 10 to 450v 1 to 4700f 20% at 120hz, 20 c printed with white color letter on blue sleeve. after storing the capacitors under no load at 125 ? c for 1000 hours and then performing voltage treatment based on jis c 5101-4 clause 4.1 at 20 c, they shall meet the specified values for the endurance characteristics listed above. type numbering system (example : 10v 220 f) 10 3 4 16 2 4 25 2 4 35 2 4 50 2 4 63 2 4 80 2 4 100 2 4 160 to 250 3 6 350 to 450 6 the specifications listed at right shall be met when the capacitors are restored to 20 ? c after d.c. bias plus rated ripple current is applied for less than 50v ( d = 8 : 2000 hours, d = 10 : 5000 hours, d > = 12.5 : 10000 hours), 63 to 100v (d = 8 : 2000 hours, d = 10 : 3000 hours, d > = 12.5 : 5000 hours), more than 160v (2000 hours) at 125 ? c , the peak voltage shall not exceed the rated voltage. 120hz z 25 c / z+20 c z 40 c / z+20 c rated voltage (v) 120hz, 20 c for capacitance of more than 1000f, add 0.02 for every increase of 1000f. rated voltage (v) tan (max.) 10 0.20 16 0.16 25 0.14 35 0.12 50 0.10 63 0.10 80 0.08 100 0.08 160 to 250 0.20 350 to 450 0.24 impedance ratio zt / z20 (max.) please refer to page 20, 21, 22 about the formed or taped product spec. please refer to page 4 for the minimum order quantity. dimension table in next page. rated voltage (v) leakage current after 1 minute's application of rated voltage, leakage current is not more than 0.03cv or 4 (a), whichever is greater. 160 to 450 cv < = 1000 : i = 0.1cv + 40 (a) max. (1 minute's) cv > 1000 : i = 0.04cv + 100 (a) max. (1 minute's) 10 to 100 bt bw high temperature please refer to page 20 about the end seal configulation. capacitance change dissipation factor leakage current less than or equal to the initial specified value 300% or less than the initial specified value (10 to 100v) 200% or less than the initial specified value (160 to 450v) within 30% of the initial capacitance value (10 to 100v) within 20% of the initial capacitance value (160 to 450v) cat.8100b
aluminum electrolytic capacitors v(code) 63 (1j) 80 ( 1k) 100 ( 2a) case size d l (mm) impedance ( ? ) max. rated ripple (marms) 4.7 10 22 33 47 100 220 330 470 4r7 100 220 330 470 101 221 331 471 8 11.5 8 11.5 10 12.5 10 16 12.5 20 12.5 25 12.5 31.5 2.00 1.50 0.59 0.41 0.16 0.12 0.097 130 150 530 690 1050 1290 1460 cap .. (f) code item case size d l (mm) impedance (?) max. rated ripple (marms) 8 11.5 10 12.5 10 12.5 10 20 12.5 25 12.5 31.5 16 25 1.50 0.80 0.80 0.39 0.18 0.16 0.11 150 480 480 790 1240 1390 1500 case size d l (mm) impedance (?) max. rated ripple (marms) 8 11.5 8 11.5 10 12.5 10 12.5 10 16 12.5 20 16 25 16 31.5 2.00 1.50 0.80 0.80 0.55 0.25 0.11 0.079 130 150 480 480 630 990 1500 1790 rated ripple current (marms) at 125 c 100khz impedance (?) max. at 20 c 100khz bt series frequency coefficient of rated ripple current frequency cv 1000 > cv 1000 cv 120hz 0.50 0.67 v 10 to 100 300hz 0.64 0.79 1khz 0.83 0.91 10khz or more 1.00 1.00 rated ripple current (marms) at 125 c 120hz 10 20 10 25 12.5 20 12.5 25 16 20 16 25 178 126 157 204 250 329 10 20 10 25 12.5 20 12.5 25 16 25 16 31.5 case size d l (mm) 160 (2c) 200 (2d) 250 (2e) 350 (2v) 400 (2g) 450 (2w) v(code) cap. code rated ripple (marms) rated ripple (marms) rated ripple (marms) rated ripple (marms) rated ripple (marms) rated ripple (marms) case size d l (mm) case size d l (mm) case size d l (mm) case size d l (mm) case size d l (mm) 4.7 10 22 33 47 68 100 150 4r7 100 220 330 470 680 101 151 115 154 187 245 329 434 10 20 12.5 20 12.5 25 16 25 16 31.5 1 78 128 171 225 292 10 20 10 25 12.5 25 16 25 16 31.5 153 185 139 189 243 10 20 10 25 12.5 31.5 16 25 16 31.5 1 53 1 86 142 189 243 10 25 12.5 20 16 25 16 31.5 158 186 154 203 4.7 to 33 0 .47 to 150 50hz 0.75 0.80 v 160 to 450 120hz 1.00 1.00 300hz 1.25 1.15 1khz 1.50 1.30 10khz 1.75 1.40 100khz or more 1.80 1.50 frequency coefficient of rated ripple current item wider range of rating. dimensions v (code) 10 (1a) 16 ( 1c) 25 ( 1e) 35 ( 1v) 50 ( 1h) case size d l (mm) impedance ( ? ) max. rated ripple (marms) 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 4700 010 2r2 3r3 4r7 100 220 330 470 101 221 331 471 102 222 332 472 8 11.5 10 12.5 10 12.5 10 20 12.5 25 16 25 16 31.5 0.26 0.15 0.10 0.057 0.033 0.024 0.020 340 620 680 1100 1750 2300 2710 cap .. (f) code item case size d l (mm) impedance (?) max. rated ripple (marms) 8 11.5 10 12.5 10 12.5 10 16 12.5 20 16 25 16 31.5 18 31.5 0.32 0.15 0.10 0.075 0.042 0.024 0.020 0.018 340 620 680 945 1490 2300 2710 3270 case size d l (mm) impedance (?) max. rated ripple (marms) 8 11.5 10 12.5 10 16 10 20 12.5 25 16 31.5 18 31.5 0.13 0.10 0.075 0.057 0.033 0.020 0.017 500 680 945 1100 1750 2710 3310 case size d l (mm) impedance ( ? ) max. rated ripple (marms) 10 12.5 10 16 10 20 12.5 20 16 25 18 35.5 0.15 0.094 0.075 0.058 0.031 0.025 620 790 950 1330 2010 2790 case size d l (mm) impedance (?) max. rated ripple (marms) 8 11.5 8 11.5 8 11.5 8 11.5 8 11.5 8 11.5 8 11.5 8 11.5 10 12.5 10 20 12.5 20 12.5 25 16 31.5 2.00 1.80 1.50 1.15 0.75 0.50 0.45 0.35 0.18 0.098 0.070 0.055 0.031 35 50 60 85 180 250 300 440 555 930 1330 1650 2430 frequency cap. (f) cat.8100b
|
